Husqvarna AUTOMOWER 550 - Parking the Lawnmower; Stopping the Lawnmower

Note: If the main working area has to be cut after
charging, it is recommended to select Resume on main
area when placing the robotic lawnmower back in the
charging station.
4.4 Operating mode - Park
When selecting Park the following operation selections
can be chosen.
• Park until further notice
• Start on next timer
• Parking duration
4.4.1 Park until further notice
When Park until further notice is chosen, the robotic
lawnmower stays in the charging station until Start is
selected.
1. Select Dashboard in the Main menu.
2. Select Park .
3. Select Until further notice .
4.4.2 Start on next timer
The robotic lawnmower stays in the charging station
until the next Timer setting permits operation. This
operation selection is suitable if one wishes to cancel an
ongoing mowing cycle and allow the robotic lawnmower
to stay in the charging station until next Timer setting
permits operation.
1. Select
Dashboard in the Main menu.
2. Select Park .
3. Select Start on next timer .
4.4.3 Parking duration
In the Park menu it is possible to choose parking
duration. The robotic lawnmower stays in the charging
station for the chosen park duration and then
automatically returns to normal operation. This operation
selection is suitable when there is a need to pause
operation for a known time period. This could be the
case for a shorter time period, for example when
watering the lawn. It could also be the case for a longer
period, for example if the grass is too short and need to
grow for a couple of days.
When the choosen duration is over, the robotic
lawnmower follows the normal Timer settings.
1. Select Dashboard in the Main menu.
2. Select Park .
3. Slide the horizontal bar of Parking duration to find a
suitable duration. It is possible to override the timer
up to 7 days.
4. Select a suitable parking duration.
4.4.4 The charging station's park button
The PARK button on the charging station is applicable
for Automower
®
520 and Automower
®
550. It is used to
call the robotic lawnmower back to the charging station.
Park in the Automower
®
Connect app offers the same
function. The PARK button on the charging station is
useful for instance when the robotic lawnmower
operates in a large working area and the operator does
not have access to the Automower
®
Connect app.
An LED in the PARK button is lit when the button has
been pressed. The LED diode goes out when the robotic
lawnmower is parked in the charging station.
The robotic lawnmower remains parked in the charging
station until Start in the Automower
®
Connect app has
been activated.
4.4.5 Operating mode - Pause
When selecting Pause in the Automower
®
Connect app,
it sends a command to the robotic lawnmower to stop
the current activity and pause. The robotic lawnmower is
paused until either Park or Start is selected in the app.
4.5 Stop
1. Press the STOP button on top of the robotic
lawnmower.
The robotic lawnmower stops and the blade motor
stops.
4.6 Switch off
1. Press the STOP button on top of the robotic
lawnmower.
2. Set the Main switch to position 0 .
362 - 002 - 06.02.2018 Operation - 41