3.14.2 Timer suggestions Automower
®
550
Work area Work days per week Work hours per day, hours Suggestion of time interval
1195 yd
2
5 7 07:00 am - 02:00 pm
7 5 07:00 am - 12:00 pm
2391 yd
2
5 13.5 07:00 am - 08:30 pm
7 10 07:00 am - 05:00 pm
3587 yd
2
5 20.5 03:00 am - 11:30 pm
7 14.5 07:00 am - 09:30 pm
4783 yd
2
6 22.5 00:00 am - 10:30 pm
7 19.5 04:00 am - 11:30 pm
5979 yd
2
7 24 12:00 am - 12:00 am
3.14.3 Edit timer settings
Tap
Edit
on the Timer Overview screen in the
Automower
®
Connect app. Several timer intervals can
be useful to enable the lawn for children's game or other
activities during certain hours. To disable mowing a
whole day, uncheck that day in the timer settings.
3.14.3.1 Edit current timer settings
1. Tap the pencil icon to edit an existing timer setting.
2. Choose which days of the week and hours the
robotic lawnmower should operate.
3. Tap
Save
.
3.14.3.2 Add a new timer setting
1. Tap the plus sign.
2. Choose which days of the week and hours the
robotic lawnmower should operate.
3. Tap
Save
.
3.15 Cutting height
CUTTING HEIGHT
Set cutting height
The cutting height can be varied from MIN (2 cm / 0.8
in.) to MAX (6 cm / 2.5 in.) in nine stages. If the grass is
long, let the robotic lawnmower start mowing at the MAX
cutting height. Once the grass is shorter, you can
gradually lower the cutting height.
CAUTION: During the first week after a new
installation, the cutting height must be set to
MAX to avoid damaging the loop wire. After this,
the cutting height can be lowered one step
every week until the desired cutting height has
been reached.
1. Tap the horizontal bar and drag it to the desired
cutting height.
2. Tap
Save
.
3.16 Operation
OPERATION
Weather timer
ECO mode
Spiral cutting
In the Operation's menu it is possible to change the
settings of the
Weather timer, ECO mode
and
Spiral
cutting
.
3.16.1 Weather timer
WEATHER TIMER
Use Weather timer
The
Weather timer
allows the robotic lawnmower to
automatically adjust its mowing time based on how fast
the grass grows.
When the
Weather timer
is activated, the robotic
lawnmower needs time to decide the optimal mowing
time for the working area in question. For this reason it
can take a couple of days before mowing is optimized
for the
Weather timer
.
The robotic lawnmower can not operate longer than the
timer settings. It is therefore recommended to only
deselect the times when the robotic lawnmower must
not operate. All other time should be made available for
the
Weather timer
.
When the
Weather timer
is activated, it is very important
to regularly check that the blade disc is clean and that
the blades are in good condition. Any grass twisted
around the blade disc shaft, or blunt blades, can affect
the
Weather timer
.
1. Tap the On/Off bar to enable/disable the
Weather
timer
.
26 - Installation 362 - 002 - 06.02.2018
To Next Page
Loading...
