Husqvarna T525 - Assembling the Tank Unit; Dismantling the Tank Unit

English – 42
B
C
F
G
H
I
A
D
E
7.16 Dismantling the tank unit
WARNING!
The fuel used for the chain saw has
the following hazardous properties:
1. The liquid and its fumes are
poisonous.
2. Can cause skin irritation.
3. Is very ammable.
1. Follow the instructions in chapter 7.24 Disman-
tling the piston and cylinder, step 1 - 8.
2. Remove the following (See Figure 53):
Ignition cables (A).
Antivibration element (B).
Foam cover (C).
Impulse hose (D).
Fuel hose hose and oil hose (E).
Loop (F).
Harness loop (G).
Chain catcher (H).
Chain tensioner (I).
Fig 53
7.17 Assembling the tank unit
Follow the instructions in the chapter 7.16 in the
reveres order. Make sure to use the correct torque.
See chapter 5 Service data.
Repair instructions