Digital Refractor CDR-9000 13
Be careful not to be inserted dust, especially, met
al.
Don’t disassemble the product or open.
We aren’t responsible for it for nothing.
Be careful not to close the fan located on the l
ateral or rear side of the equipment.
Don’t plug the AC power cord into the outlet b
efore the connection between devices of the eq
uip m e nt is c o m p l e t e d . This can generate the
defect.
Pull out the power cord with holding the plug,
not the cord.
For the normal operation of the machine, please keep the ambient temperature i
s 10
℃
~ 35
℃
, humidity is 30% ~ 90% and atmospheric pressure is 800 ~ 1060
hpa. For the Transfortation of the machine, please keep the ambient temperature
is -40
℃
~ 70
℃
, humidity is 10% ~ 95% and atmospheric pressure is 500 ~ 10
60hpa. For the Storage of the machine, please keep the ambient temperature is
-10
℃
~ 55
℃
, humidity is 10% ~ 95% and atmospheric pressure is 700 ~ 1060h
pa. Avoid environments where the equipment is exposed to excessive shocks or
vibrations.
To Next Page