Digital Refractor CDR-9000 49
CDR-9000 system supports various functions through menu selection. To select
menu, just press the [MENU] button and press the Menu item of the touch scre
en. Otherwise, use the arrow buttons or the dial to move and the [SET] button
to select. Menu item are as follows.
-
Test Result: For showing the whole test results. The results can be preview
ed systematically in both tabular and graphical forms including the kerato
metry measurement if available.
-
System Config: For the system configuration. You can set up all sorts of v
alues related to the system.
-
Edit Program: For creating or modifying a user-designable pre-programmed
sequences up to 10.
-
Edit Test: For creating or modifying a user-designable unit test that can b
e assigned in one of the 35 chart buttons on the Operation Panel. The us
er-designed unit test may executed by pressing the user assigned button
and the [CUSTOM] button of the touch screen. So it never erase any syste
m-providing unit test when the user assigns a new user-designed test in a
certain chart button.
-
Edit Message: For editing various kinds of messages used in the Operation
Panel. You can edit the name of the user-designed program, the user des
igned unit test, the test guide message, and the shop name. The shop na
me is the message that is printed on the bottom line of the printout incl
uding that of CDRMate.
-
Gallery: For showing various kinds of near charts in the Operation Panel.
To Next Page
Loading...