Digital Refractor CDR-9000 77
9. Editing User-Designable Program & Test
If user-designable programs are made matching for the doctor to use them and
the purpose of the program in advance, the training cost will be greatly reduce
d and the inspection will be processed more quickly. You will catch two hares at
a time. Unit test can be reformed to operator‘s capabilities and thus provides a
mazing enlargement. So you can benefit from this. For example, when using the
Dual/Jackson Cross Cylinder, you can re-define familiar number chart on behalf
of the boring Dots Group chart for Unit Test.
Program Editing function is divided into two parts: User-Defined Program and U
nit Test Program. Since the Unit Test is thought of as a 1-step user-designable p
rogram, if you could edit user- designable program in your own way, Unit Test f
ollows naturally. To begin with, let’s start from the user- designable program.
9.1. Editing User-Designable Program
To edit a user-defined program, press the [MENU] button first and then select
“Edit Program” of the touch screen. Then program selection display will be show
n. You can here select one from 10 programs (You cannot select STANDARD (i.e.
system defined program), STANDARD will be show icon) and each program
will be show a program name, total step, lock/unlock icon. Use arrow buttons a
nd the dial to select one (for example, CUSTOM-A) or press the program name
of the touch screen. Then the ‘Edit Program’ will be executed about each of the
program.
To Next Page
Loading...