Digital Refractor CDR-9000 75
8.2.6. Page 6 - PRINT OPTION
1
Print Subjective: specifies items to print while printing the result of the su
bjective test. Choose One among ALL (all the data), W/O UNAIDED VA (w
ithout result unaided visual acuity), W/O BIN VF (without results of the vi
sual function test ), SUBJ & FIN ONLY (showing only the SUBJ and FIN in
formation) and OFF (without any subjective test). Default value is ALL. If a
ll of the print options
①
through
④
are set to OFF or NO, the internal
printer prints out nothing.
2
Print Objective: specifies item to print while printing the results of the obj
ective test. Choose one among ALL (all the data), RK ONLY (showing the
RK information only), LM ONLY (showing the LM information only) and O
FF (without any objective test). Default value is OFF. If all of the print opt
ions
①
through
④
are set to OFF or NO, the internal printer prints out
nothing.
3
Print Kerato Data: specifies whether Kerato value will be printed or not. Y
ES or NO can be chosen. Default value is NO. If all of the print options
①
through
④
are set to OFF or NO, the internal printer prints out nothi
ng.
4
Print ΔTest Data: specifies whether the preview of the prism test for each
phoria test will be printed or not. YES or NO can be chosen. Default val
ue is NO. If all of the print options
①
through
④
are set to OFF or NO,
the internal printer prints out nothing.
5
Preview List: specifies whether the results will be shown or not when the
[PRINT] button is pressed. YES or NO can be chosen. Default value is YES.
6
Auto Clear: specifies whether the test results will be initialized or not whe
n the [PRINT] button is pressed. YES or NO can be chosen. Default value
is YES.
To Next Page
Loading...