18 Digital Refractor CDR-9000
Do NOT use 200-240 Vac power input for CDR-9000(JB) in the region
of North America under the authority of UL.
1. Using standard protocol CAN, all appliances are connected by daisy-chain
line. As a result, CDR-9000 system makes office environment more clean a
nd modest.
2. Because 1 or more(up to 8) CDR-9000 system and 1 or more(up to 4 eac
h) LM/RK are connected without any additional equipment, high utilization
and low cost can be achieved.
3. Compatibility between SHANGHAI HUVITZ products enables to manage pa
tients’ data more easily. For example, not only S/C/A value but also KER,
PD data are gathered automatically from RK. Also S/C/A value, prism, add
itional power data are gathered automatically from LM. All of these data
are presetting to the CDR-9000 system without manual control.
4. CDR-9000 system supports near PD (48~80mm) and near working distanc
e (50~74cm), so you can execute perfect near vision tests.
5. Separated Dual Cross Cylinder lens and automatic occlusion during lens c
hange makes more accurate test result.
6. For accurate Phoria and Strabismus test, CDR-9000 system support prism
measurement by 0.1D unit up to 20D unit. Also automatic occlusion durin
g prism change minimizes the examinee’s eye adaptation.
7. On-line guide assist examiners to finish test fast and convenient.
8. To analyze result at a glance, CDR-9000 system supports table and graphi
c result display facilities.
To Next Page
Loading...