Digital Refractor CDR-9000 17
oubt, contact qualified technician or your local representative." (Or some c
ases, for example LCD Monitor, "This device is intended to connect to the
medical device only, which complies with standards of IEC 60601 series.")
23. Do not touch signal input/signal output and patient simultaneously (exam
ple, Ref. Body and OP connectors of DIGITAL REFRACTOR CDR-9000, RS-2
32C of DIGITAL REFRACTOR CDR-9000(OP) and connectors of Converter B
ox).
Digital Refractor is heavy, so please fix it on the unit table not to be
moved.
Otherwise, heavy equipment crash to fall examinee. As a result, exami
nee may be hurt.
To perform automatic POST (Power on Self Test), Digital Refractor mov
es left and right side, To avoid injury of examinee, please keep exami
nee from Digital Refractor at least 20cm or more during POST initializ
ation.
Do not place your hand or finger between the left and the right side
of Digital Refractor. Also ensure that the examinee does not place his
/her hand or fingers there either. Otherwise, hand or fingers may be
hurt.
Digital Refractor CDR-9000(JB) does NOT support rack installation nor
wall-mount installation. Any other device for Digital Refractor CDR-900
0(JB) installation should be compliant with relevant IEC standard.
To Next Page
Loading...