200 Digital Refractor CDR-9000
16.1. Digital Refractor doesn’t work at all
1. Check if power cord is connected correctly.
2. Check if the 24-pin and 15-pin cables for the Refractor Body and the Ope
ration Panel are connected correctly.
3. Check if any of the fuses in the Junction Box is blown off.
16.2. Refractor Body makes noisy sound while performing powe
r-on self-test
1. Check if any of the fuses in the Junction Box is blown off.
2. Check if the voltage setting is correct in the Junction Box.
16.3. Operation Panel displays empty screen
1. Check if the 15-pin cable is connected correctly
2. Check if the LED of the Operation Panel turned on.
16.4. Operation Panel doesn’t print out
1. Check if printing paper is loaded inside out.
2. Check if the printer cover is closed correctly.
3. Check if any of the fuses in the Junction Box is blown off.
To Next Page
Loading...