SPECIFICATIONS
2-6 HPR260 Manual Gas Instruction Manual
0
Ignition console – 078172
• The ignition console may be mounted locally on the power supply (LHF) or remotely on the cutting table’s bridge
(RHF). See Installation section for details.
• Maximum cable length from the ignition console to the torch lifter station is 20 m (65 ft). Allow room to remove
the top for servicing.
• The ignition console may be mounted horizontally or vertically.
9.1 kg
20 lb
283 mm
11.125"
219 mm
8.625"
194 mm
7.625"
152 mm
6"
216 mm
8.5"
To Next Page
Loading...
