118 HyPrecision 50S/60S/75S Operator Manual 808690
5 – Preventive maintenance
Preventive maintenance
Required parts, tools, and materials
15563 HyPrecision premium high-pressure seal repair kit
15568 HyPrecision S- and D-series poppet repair kit
11523 Check valve assembly
11520 Low-pressure poppet basket
11521 Spacer tube
11522 High-pressure cylinder
High-pressure antiseize lubricant such as Blue Goop or AccuGoop
Seal installation tools (refer to
Tools on page 74)
Rubber mallet
1. Put the seal installation spacer tool on a clean, dry, oil-free surface.
2. Put the high-pressure cylinder over the spacer tool so that the tool fits in the cylinder bore.
3. Put the low-pressure poppet into the low-pressure poppet basket.
Make sure that the poppet moves freely.
Keep the poppet and the poppet basket clean. Grease can cause the poppet to stick.
To Next Page
Loading...
Need help?
General
