HyPrecision 50S/60S/75S Operator Manual 808690 59
4 – Operation
Operation
Inc Amount (PSI)
Set the increment for increasing pressure.
The default value is 500 psi.
Dec Amount (PSI)
Set the increment for decreasing pressure.
The default value is 500 psi.
Init Jump Inc/Dec
Set the initial jump amount for increasing or decreasing pressure.
The default value is 500 psi.
Real Ramp Setpoint
Set how quickly the pump ramps up to the specified pressure.
The higher the value, the faster the pump ramps up.
The default value is 10 seconds.
To Next Page
Loading...
Need help?
General
