58 HyPrecision 50S/60S/75S Operator Manual 808690
4 – Operation
Operation
T(sec) for BDV Dump
Set the number of seconds that the bleed-down valve is open when changing from
cut-pressure mode to pierce-pressure mode.
Max Pressure
Set the maximum pressure at which the pump can be operated.
This is only applicable for pumps with a proportional control valve.
Inc Interval (.1 sec)
Set the time between steps during ramping up when adjusting the pressure manually
on the operator interface.
This is only applicable for pumps with a proportional control valve.
Dec Interval (.1 sec)
Set the time between steps during ramping down when adjusting the pressure
manually on the operator interface.
This is only applicable for pumps with a proportional control valve.
To Next Page
Loading...
Need help?
General
