Hypertherm Powermax105 User Manual

Maintenance and RepaiR
8-14 Powermax105 Operator Manual
Install the air filter bowl (metal guarded, plastic, or nylon)
10. Vertically align the filter bowl and firmly push the filter bowl up to the top of the receptacle to seat the bowl.
11. Once the bowl is seated properly, rotate the bowl 45degrees to the left until you hear the thumb latch click into
place.
12. Reconnect the gas supply hose to the power supply and check for leaks.
13. Reconnect the electrical power and turnON the power switch.

Hypertherm Powermax105 Specifications

General

Brand	Hypertherm
Model	Powermax105
Category	Welding System
Language	English