Hypertherm powermax1250 User Manual

SETUP
1
powermax1250 Operator Manual 3-3
Locating the power supply
Locate the Powermax1250 power supply with at least 10 inches (0.25 m) of open space at the
front and back and fan side of the power supply for proper ventilation.
Hoist
Cover in place
Approved hoisting strap.
Keep as vertical as
possible
Lifting the power supply
WARNING
• The system weighs up to 112 lb / 51 kg.
• Always lift the power supply by TWO handles.
• Do not lift the power supply by ONE handle.
• The handle can break, resulting in injury and damage.

Hypertherm powermax1250 Specifications

General

Brand	Hypertherm
Model	powermax1250
Category	Welding System
Language	English