Hypertherm powermax1250 User Manual

SETUP
1
3-8 powermax1250 Operator Manual
Align the marks on the strain relief.
Pull back the quick release collar and insert the lead’s gas fitting.
Slide the quick release collar foward to lock in the gas fitting. Make sure that the gas
fitting is secure.
Make sure that the red dot on the connector is on top, then plug in the electrical
connector. Close the ETR door.
Quick Release
Collar
4
5
6
7

Hypertherm powermax1250 Specifications

General

Brand	Hypertherm
Model	powermax1250
Category	Welding System
Language	English