Hypertherm powermax900 User Manual

OPERATION
4-5
Operator Manual
PAC125T Safety Trigger Operation
The PAC125T safety trigger torch allows operators to safely handle the torch before and after the cut
and to minimize the possibility of accidental torch firing.
The safety trigger is easy to operate. Follow the steps below.
Safety On position. In this position
the trigger cannot be pulled
back, and the torch cannot fire.
To fire the torch, start pushing the safety
forward. Do not pull back on the trigger
until the safety reaches the Safety Off
position..
1
2
Safety Off position. In this position,
the trigger can be pulled back and the
torch can fire.
3
Release the safety to return to the
Safety On position shown in step 1.
4
Figure 4-4 PAC125T Torch Safety Trigger Operation

Hypertherm powermax900 Specifications

General

Brand	Hypertherm
Model	powermax900
Category	Welding System
Language	English