Hytorc BTM-0250-DOC - Page 26

26
The user may enable a
lockout mode that prevents
any user from changing
any parameter except
directional control. This
allows the administrator
to lock the tool at desired
settings for various
users. Press the buttons
i to scroll to ENABLE
or DISABLE lockout
mode, press  to select
LOCKOUT MODE and
return to the ADMIN menu
Allows user to set time
and date by entering
appropriate numerical
values.
Press up button 
increases the value
and down button i
to decrease the value,
select  to advance to
the next numerical value,
after setting year push
 to return to SYSTEMS
SETTINGS menu.
To adjust the minimum
TORQUE limit press button
 to increase the value or i
to decrease the value.
Press  to save the lower
torque limit – screen
flashes “Saving setting”
and then displays the
upper torque limit screen.
To adjust the maximum
TORQUE limit press button
 to increase the value or i
to decrease the value.
Press  to save the upper
torque limit – screen
flashes “Saving setting”
and then exits to ADMIN
menu.
(ADMIN MENU continued from previous page)
ENTER GENERAL
PASSWORD
ENTER GENERAL
PASSWORD
ENTER GENERAL
PASSWORD