LITHIUM SERIES® Electric Torque Tool (BTM-DOC Models) Operations Manual
35
• The LITHIUM SERIES Tool is easily configured for tightening HYTORC Nuts.
• Identify the appropriate size HYTORC Nut Driver
• Slide the nut driver over the square drive and spline while aligning the set screw with the flat on the spline.
• Tighten the set screw to secure Nut Driver.
• Challenge the nut driver to make sure it is securely attached.
INSTALL THE HYTORC NUT DRIVER
. BOLTING WITH THE HYTORC NUT
To Next Page
Loading...
