LITHIUM SERIES® Electric Torque Tool (BTM-DOC Models) Operations Manual
Models
BTM-0250-DOC
BTM-0750-DOC
BTM-1000-DOC
BTM-2000-DOC
BTM-3000-DOC
Technical Certifications
Conforms to UL STDS 60745-1 & 60745-2-2
Certified to CSA STD C22.2 Nos. 60745-1 & 60745-2-2
For Hand-Held Motor-Operated Electric Tools.
5002282
EN ISO 12100-1:2011
EN ISO 12100-2:2011
EN ISO 14121-1:2007
EN ISO 11148-6:2012
Notice. The information contained in this document is subject to change without notice. HYTORC makes no warranty of any kind
with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
HYTORC shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this material. It is further recommended that the end-user or repair technician insure they have obtained and
are familiar with the latest revision of the manual for the equipment outlined in this document.
Restricted Rights Legend. Use and duplication of the information contained within this manual is limited to the purchaser, end user,
or licensed HYTORC representative. It is recommended that proper training for the equipment outlined in this manual be conducted
by a HYTORC-authorized training representative for any person who is operating or repairing the equipment outlined in this docu-
ment. Modification of, or disclosure by any other agency or representative is strictly forbidden.
Product Modifications. HYTORC DOES NOT ALLOW any of the products listed in this manual to be modified by any end user without
exception. Should an application require a modification to the tool, or any of the standard accessories please consult with your local
HYTORC representative and they will be able to obtain the assistance for any modification that may be required.
LITHIUM SERIES® is a registered trademark of HYTORC.
Copyright © 2018 HYTORC All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohib-
ited, except as allowed under the copyright laws.
Warranty. The LITHIUM SERIES Tool has a one-year limited warranty. Every tool is tested before leaving the factory and is warranted
to be free from defects in workmanship and materials. HYTORC will repair or replace, without charge, any tool which, upon examina-
tion, proves to be defective in workmanship or materials for one (1) year after the date of purchase. This warranty does not cover dam-
age resulting from repairs made or attempted by unauthorized repair facilities. The repair and replacement remedies described herein
are exclusive. In no event shall HYTORC be liable for any incidental, special, or consequential damages, including loss of profits. This
warranty is exclusive and in lieu of all other warranties or conditions, written or oral, expressed or implied for merchantability or fitness
for particular use or purpose. This warranty gives you specific legal rights. You may also have other rights that vary from state to state
and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequen-
tial damages, the above limitations or exclusions may not apply to you. If you have questions about the warranty, contact our customer
service center at 201-828-5270.
Printed in the USA. April 2018
TECHNICAL CERTIFICATIONS
To Next Page
Loading...
