Chapter 1 Specications Check
21
Chapter 1 Specifications Check
1.1 Product Check
1.1.1 Parts
The standard configuration of this product is comprised of the following parts.
If you find any fault in the contained model or missing parts, contact us or our distributor.
No. Part Name Model Quantity Remarks
1 Controller
Refer to “How to read the model
plate”, “How to read the model”
1
Accessories
2
Control Power Supply
Connector
MC1.5/5-STF-3.81
(Supplier: PHOENIX CONTACT)
1
3
Motor Power Supply
Connector
GMSTB2.5/3-STF-7.62
(Supplier: PHOENIX CONTACT)
1
4 System I/O Connector
FMCD1.5/4-ST-3.5
(Supplier: PHOENIX CONTACT)
1
5
CC-Link Connector
(For CC-Link Type)
SMSTB2.5/5-ST-5.08 AU
(Supplier: PHOENIX CONTACT)
1
6
DeviceNet Connector
(For DeviceNet Type)
SMSTB2.5/5-ST-5.08 AU
(Supplier: PHOENIX CONTACT)
1
7
Absolute Battery Unit
(Absolute Type)
(Battery AB-5) 1
Number of batteries is
determined by the number
of axes to be connected.
8 First Step Guide ME0305 1
9
Instruction Manual
(DVD)
1
10 Safety Guide M0194 1
1.1.2 Teaching Tool
For the setup operation such as position setting and parameter setting by a teaching, conduct it
on PC software.
Prepare a teaching tool such as PC software and so on for the operations and tunings.
No. Part Name Model
1
PC Software
(Includes RS232C Exchange Adapter + Peripheral Communication
Cable)
RCM-101-MW
2
PC Software
(Includes USB Exchange Adapter + USB Cable + Peripheral
Communication Cable)
RCM-101-USB
3
Touch Panel Teaching Pendant CON-PTA/PDA/PGA
(Standard Type / Deadman Switch Attached Type
Deadman Switch + TP Adapter (RCB-LB-TG) Attached Type)
CON-PTA
/CON-PDA
/CON-PGA
4
Touch Panel Teaching Pendant TB-01
(Standard Type / Deadman Switch Attached on the Left side Type /
Deadman Switch Attached on the Right side Type)
TB-01/TB-01D/
TB-01DR
5
Touch Panel Teaching Pendant TB-02
(Standard Type / Deadman Switch Type)
TB-02/TB-02D
6 Touch Panel Teaching Pendant TB-03 Wired Link TB-03
7 Gateway Parameter Setting Tool –
To Next Page
Loading...
