IAI MSCON - 3.9 About Gateway Parameter Setting Tool

3.9 About Gateway Parameter Setting Tool
217
3.9 About Gateway Parameter Setting Tool
This tool is necessary for the initial setting process such as MSCON operation mode select.
Shown below is how to use the tool.
3.9.1 Startup of Tool
1) Boot the Gateway Parameter Setting Tool after the power to MSCON is turned ON, and the
window shown below appears.
Select “MSCON GW” and click on the OK button.
2) Once MSCON is detected the detected unit numbers become available to select. Select the
unit number to be connected and click the OK button.
MSCON being detected Select the unit number to be connected
ME0306-2A