IAI MSCON - Page 33

Chapter 1 Specications Check
25
Item Description
Cooling Method Forced air-cooling
External Dimensions 225W × 154H × 115D
Incremental Type
Battery-less Absolute Type
Approx. 1900g
Mass
(when
drivers for
6 axes
mounted)
Absolute Type Approx. 2000g (including batteries)
Surrounding air temperature
0 to 40 °C
Surrounding humidity 85%RH or less (non-condensing)
Surrounding environment [Refer to 1.7 Installation and Storage Environment.]
Surrounding storage
temperature
−20 to 70
°C
Note: 0 to 40 °C for absolute battery.
Surrounding storage humidity 85%RH or less (non-condensing)
Usable Altitude 1000m or lower above sea level
Vibration Durability
Frequency 10 to 57Hz/
Swing width: 0.075mm
Frequency 57 to 150Hz/
Acceleration 9.8m/s
2
XYZ Each direction Sweep time: 10 min. Number of sweep: 10 times
Package Drop Dropping height 800mm, 1 corner, 3 edges and 6 surfaces
Protection Class IP20
Pollution Degree II
Environ-
ment
Overvoltage Category III
Note1: The rush current value varies depending on the impedance of the power line.
ME0306-2A