IAI PCON-CFB series - Replacement of Fan (PCON-CFB)

Chapter 10 Appendix
POWER CON
PCON-CB/LC
252
10.4.3 Replacement of Fan (PCON-CFB)
If an error is detected on the fan, replace the fan unit by following the process stated below.
[Procedure 1] Prepare a new fan unit and pull the fan unit desorption lever to release the lock.
[Procedure 2] Pull out the fan unit to detach.
[Procedure 3] Attach a new fan unit considering the connector on the unit matches with the
connector on the upper side of PCON-CFB.
[Procedure 4] Push in the fan unit desorption lever till it makes a click noise.