IAME Parilla Norswift 60cc - Install the Intake Silencer; Install the Exhaust System

11 MAN-071
3.8
INSTALL THE INTAKE SILENCER
-MAKE SURE THAT THE INTAKE SILENCER
HAS THE INLET HOLE TOWARDS THE UPPERSIDE
AND THAT THEY ARE NOT PLUGGED.
(SEE FIG. 23)
-TIGHTEN THE FIXING CLAMP ON THE CARB.
AND SUPPORT THE INTAKE SILENCER
PROPERLY.
(SEE FIG.24)
3.9
INSTALL THE EXHAUST SYSTEM
-INSTALL THE EXHAUST MUFFLER ON THE
MANIFOLD AND SECURE IT WITH THE 2
SPRINGS.
(SEE FIG. 25)
THE ENGINE IS READY TO BE STARTED
Fig. 23
Fig. 24
Fig. 25