12 MAN-071
4- GASOLINE AND OIL
Use leaded or unleaded gasoline with minimum 95 ROM, mixed with oil at 3% (33:1).
Use oils containing ricinoleate which ensures optimum lubrication at high temperatures
As on the other hand use oils containing ricinoleate creates gummy residues which give
origin to carbon deposits, it is necessary to check and clean, at least every 5÷10 hours,
the piston and the cylinder head.
Our experience dictates use of oil such as:
WLADOIL RACING K2T
Once the fuel tank is filled, make sure that the gasoline reaches the carburettor, before
starting the engine.
ADVISE:
Disconnect the plastic tube from the carburettor and pressurize the vent tube on the tank,
until gasoline comes out from the tube on the carburettor side. Make sure there is no air
in the tube.
Connect the tube to the carburettor.
To Next Page
Loading...
Need help?
General