AFE1_AFE2-1:1
34
Technical specifications
IAR Debug Probes User Guide
I-jet®, I-jet Trace, and I-scope™
cTI20 header information (for target board)
The cTI20 header is manufactured by Samtec USA. The model number is
FTR-110-51-S-D-06. For more information, see the manufacturer's web page,
http://www.samtec.com/products/ftr.
The ADA-MIPI20-STSWD6 adapter
The ADA-MIPI20-STSWD6 adapter converts the I-jet standard MIPI-20 cable pinout
to the ST SWD 6-pin female connector header.
The target header has pins spaced at 0.1 in (2.56 mm). The adapter has 6-pin female
connector plus two wire cables with female connectors for connecting SWD voltage
reference input (VTref) and 5V_OUT to optionally power the target board from the
debug probe.
G 0.19 in (0.5 mm)
H 0.2 in (5.1 mm)
I 0.36 in (9.1 mm)
To Next Page
Loading...