107
Removing Adapter Cards
Follow these steps to remove an adapter card:
q
Position the system unit so that the card is accessible to
you.
q
If the adapter card has cables, disconnect them. Be sure
to take note of where the cable are connected. You will
have to reconnect these cables when you reinstall the
card.
q
Remove the adapter card screw
q
Firmly hold the adapter card and carefully pull it from the
card connector.
q
If you are not reinstalling the card, reinstall all other
hardware and screws that were removed prior to the
removal of the adapter card.
To Next Page
Loading...
Need help?
General