117
Identifying the Parts of the System Unit
This computer system has 3 bays; each bay has a factory-
installed drive in it. The devices are 3.5” Diskette, 40X CD-
ROM drive and 5.0 GB hard disk (some models may have
hard disk of 10 or 15 GB capacity).
Diskette drives in this unit use the standard diskette
advanced technology (AT) Interface. Hard disk and CD-ROM
drives in this unit use an integrated drive electronics (IDE)
AT interface. This computer supports the American National
Standard Institute (ANSI) standard for AT attachment disk
drives and CD-ROMs.
This system has 3 interface cards slots for adapter card
expansion. All of them are Peripheral Component
Interconnect (PCI) interfaces.
This system has 1 video bridge expansion slot adjacent to
the PCI slots. All models of this system have a 10/100 Mbps
Ethernet port on board.
1. Power Supply
This is a 95-watt switching power supply.
2. Expansion slots
On the rear panel of the system unit are 3 slot openings for
installation of adapter card.
3. Modem card
This system may include a V.90 Data/Fax modem.
4. Diskette Drive
This machine has a factory-installed 3.5” 1.44MB floppy
drive.
5. PCMCIA drive
6. CD-ROM Drive
This machine has a factory-installed 40X CDROM drive.
To Next Page
Loading...
Need help?
General