150
General Guidelines
The purpose of this Safety Inspection Guide is to help you
identify possible unsafe conditions on machines that are
being inspected for a Maintenance Agreement. Each machine
has necessary functions items installed to provide the
operators and service personnel with an acceptable level of
safety. This guide lists only these items. Good judgment
should be used to identify possible safety conditions not
covered by this Safety Inspection Guide.
If any unsafe conditions are present, you must find out how
serious the hazard is and if you can continue before you
correct the hazard.
All current IBM service supplements outlining feature/model
changes, along with the machine history, should be reviewed.
Check the following items:
q
Damaged, missing, or changed parts, especially in the
area of the On/Off switch and the power supply.
q
Damaged, missing, or changed covers.
q
Possible safety exposure from any non-IBM
attachments.
To Next Page
Loading...
Need help?
General