45
Devices and I/O ports
The options in this menu item are used to configure the
devices and the I/O ports that this system has.
Diskette Drive A
Determines the type of Diskette Drive A.
PS/2 Mouse Function
Determines the mouse function is enabled or disabled.
On Board Audio
Determine the on board Audio function to be enabled or
disabled.
On Board LAN
Determines the on board LAN function to be enabled or
disabled.
Serial Port Setup
Determines the I/O port address and Interrupt Request
Number of serial port.
Parallel Port Setup
Determines the I/O port address and Interrupt Request
Number of parallel port.
USB Setup
The options in this menu item are used to enable the USB
(Universal Serial Bus) functions.
USB Controller
Select enabled if you will use USB device.
USB Keyboard Support
Select enabled to use a USB keyboard. Also the USB
Controller must be set to enabled.
IDE Drives Setup
PIO (Programmed Input/Output)
IDE device driver controllers can support up to two separate
To Next Page
Loading...
Need help?
General