Removing the covers
The following steps apply to all models and to both the wide and narrow features.
The covers consists of the following parts:
v Front bezel
v Hinged rear door (modesty cover)
v Top cover
1. Remove the front bezel following these steps:
a. See Figure 17. Press the left latch and depress the center latch to loosen
the bezel.
b. Press the right latch to release the bezel and pull it forward, lifting the bezel
from the machine.
A
A
Figure 17. Removing the front bezel
Updated July 14, 2008
Chapter 2. Removal and replacement procedures 29
To Next Page
Loading...
