Removing the power supply
To remove the power supply:
1. Follow the instructions in “Removing the covers” on page 29.
2. Follow the instructions in “Removing the top plate” on page 32.
3. Follow the instructions in “Removing the spline” on page 41.
4. Disconnect the internal power cord connected to the power supply.
Q
Figure 36. Removing the power supply
Figure 37. Example of Model 742 and 782 processor power cable
Updated July 14, 2008
48 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide
To Next Page
Loading...
