2. Follow the instructions in “Removing the top plate” on page 32 to remove the
top plate.
3. Unplug the attached cables.
Note: Model C42 connects to the CD-ROM with serial ATA connectors. Unplug
these connectors (A in Figure 23 on page 35) by squeezing on the
latch and pulling outward.
D
C
Figure 22. Removing the CD-ROM
Updated July 14, 2008
34 SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide
To Next Page
Loading...
