IBM AS/400e

AS/400e Dedicated Server for Domino
140 AS/400e System Handbook
– #2424 Dedicated Domino processor: Pulsar 2-way
• Includes 16 DIMM memory positions via the base main storage expansion card
(CCIN 2884).
With the main storage expansion card (CCIN 2884), the DIMMs must be in sets of
four (quads) of the same capacity. There is an exception that allows a single pair
of DIMMs on a main storage expansion card (CCIN 2884) if these are the only two
DIMMs on the system. If any additional DIMMs are added above the initial two, the
initial two must be paired up to make a quad, and then only DIMM quads can
subsequently be added.
• Includes Base I/O backplane (CCIN 282F)
• Includes embedded base IOP (CCIN 284E)
• Includes Common Service Processor (CCIN 282F)
• Includes internal flex cable for HSL enablement
• AS/400e server 820 Dedicated Server for Domino processors:
– #2425 Dedicated Domino processor: Pulsar Uni Processor
• Includes eight DIMM memory positions (which plug directly onto the processor -
direct attach).
An optional priced Main Storage Expansion Card feature #2884 is available that
supports 16 DIMM memory positions. Either direct attach or main storage
expansion feature can be used, but not both. Without the #2884, the DIMMs must
be paired. With the #2884, the DIMMs must be in sets of four (quads) of the same
capacity. There is an exception that allows a single pair of DIMMs on a #2884 if
these are the only two DIMMs on the system. If any additional DIMMs are added
above the initial two, the initial two must be paired up to make a quad and then
only DIMM quads can subsequently be added.
• Includes Base I/O backplane (CCIN 282D)
• Includes Common Service Processor
– #2426 Dedicated Domino processor: IStar 2-way
• Includes 16 DIMM memory positions via the base main storage expansion card
(CCIN 2884).
With the main storage expansion card (CCIN 2884), the DIMMs must be in sets of
four (quads) of the same capacity. There is an exception that allows a single pair
of DIMMs on a main storage expansion card (CCIN 2884) if these are the only two
DIMMs on the system. If any additional DIMMs are added above the initial two, the
initial two must be paired up to make a quad, and then only DIMM quads can
subsequently be added.