CIM Information: Prefix: IMM and ID: 0115
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000074-00000000 The soft minimum power cap value changed from [arg1] watts to [arg2] watts.
Explanation: The soft minimum power cap value has been changed.
May also be shown as 4000007400000000 or 0x4000007400000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0116
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000075-00000000 The measured power value exceeded the power cap value.
Explanation: The measured power value has exceeded the power cap value.
May also be shown as 4000007500000000 or 0x4000007500000000
Severity: Warning
Alert Category: Warning - Power
Serviceable: No
CIM Information: Prefix: IMM and ID: 0117
SNMP Trap ID: 164
Automatically notify Support: No
User response:
v Make sure IMM firmware is at the latest level.
v Raise the system power cap value or adjust the system workload to be less than the currently applied power cap.
40000076-00000000 The new minimum power cap value exceeded the power cap value.
Explanation: The new minimum power cap value has exceeded the power cap value.
May also be shown as 4000007600000000 or 0x4000007600000000
Severity: Warning
Alert Category: Warning - Power
Serviceable: No
CIM Information: Prefix: IMM and ID: 0118
SNMP Trap ID: 164
Automatically notify Support: No
User response: User may need to adjust the power cap value to be greater or equal to the minimum power cap.
40000074-00000000 • 40000076-00000000
102
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
To Next Page