EasyManua.ls Logo

IBM Flex System x440 Compute Node - Page 115

IBM Flex System x440 Compute Node
584 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40000077-00000000 Power capping was activated by user [arg1].
Explanation: The power capping control has been enabled.
May also be shown as 4000007700000000 or 0x4000007700000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0119
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000078-00000000 Power capping was deactivated by user [arg1].
Explanation: The power capping control has been enabled.
May also be shown as 4000007800000000 or 0x4000007800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0120
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000079-00000000 Static Power Savings mode has been turned on by user [arg1].
Explanation: Static Power Savings mode turned on by user
May also be shown as 4000007900000000 or 0x4000007900000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0121
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000007a-00000000 Static Power Savings mode has been turned off by user [arg1].
Explanation: Static Power Savings mode turned off by user
May also be shown as 4000007a00000000 or 0x4000007a00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0122
40000077-00000000 4000007a-00000000
Chapter 6. Troubleshooting 103

Table of Contents