IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
8007020f-2582ffff Sensor NO I/O Resources has transitioned to critical from a less severe state.
Explanation: IMM has detected a "No I/O Resources" Sensor has transitioned to critical.
May also be shown as 8007020f2582ffff or 0x8007020f2582ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Information
Center for the appropriate user response.
80070217-2c02ffff Sensor Mezz Exp 2 Fault has transitioned to critical from a less severe state.
Explanation: The I/O expansion adapter in I/O expansion connector 2 has reported a fault.
May also be shown as 800702172c02ffff or 0x800702172c02ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response: Complete the following steps:
1. Remove any recently installed components.
2. Try to power on the chassis.
v If the chassis successfully powers on, complete the following steps:
a. Check the ServerProven website to make sure that recently installed components are compatible with the
chassis.
b. Inspect the previously installed components for physical damage.
v If the chassis does not successfully power on or if this is not the first occurrence of this problem, replace the
I/O expansion adapter.
80070217-2c03ffff Sensor Mezz Exp 3 Fault has transitioned to critical from a less severe state.
Explanation: The I/O expansion adapter in I/O expansion connector 3 has reported a fault.
May also be shown as 800702172c03ffff or 0x800702172c03ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
8007020f-2582ffff • 80070217-2c03ffff
116
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
To Next Page