EasyManua.ls Logo

IBM Flex System x440 Compute Node - Page 173

IBM Flex System x440 Compute Node
584 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SNMP Trap ID: 5
Automatically notify Support: Yes
User response: Complete the following steps until the problem is solved:
1. Check the Support Portal for service bulletins and RETAIN tips related to your drive.
2. Check the Support Portal for firmware updates related to your drive.
3. Replace the drive.
4. Check for any other RAID-related errors.
806f010d-0405ffff The Drive Drive 5 has been disabled due to a detected fault.
Explanation: The hard disk drive controller has detected a fault in hard disk drive 5. Hard disk drive 5 is now
defunct.
May also be shown as 806f010d0405ffff or 0x806f010d0405ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response: Complete the following steps until the problem is solved:
1. Check the Support Portal for service bulletins and RETAIN tips related to your drive.
2. Check the Support Portal for firmware updates related to your drive.
3. Replace the drive.
4. Check for any other RAID-related errors.
806f010d-0406ffff The Drive Drive 6 has been disabled due to a detected fault.
Explanation: The hard disk drive controller has detected a fault in hard disk drive 6. Hard disk drive 6 is now
defunct.
May also be shown as 806f010d0406ffff or 0x806f010d0406ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response: Complete the following steps until the problem is solved:
1. Check the Support Portal for service bulletins and RETAIN tips related to your drive.
2. Check the Support Portal for firmware updates related to your drive.
3. Replace the drive.
4. Check for any other RAID-related errors.
806f010d-0407ffff The Drive Drive 7 has been disabled due to a detected fault.
Explanation: The hard disk drive controller has detected a fault in hard disk drive 7. Hard disk drive 7 is now
defunct.
May also be shown as 806f010d0407ffff or 0x806f010d0407ffff
806f010d-0405ffff 806f010d-0407ffff
Chapter 6. Troubleshooting 161

Table of Contents