40000022-00000000 SSL data in the Management Controller [arg1] configuration data is invalid. Clearing
configuration data region and disabling SSL.
Explanation: There is a problem with the certificate that has been imported into the IMM. The imported certificate
must contain a public key that corresponds to the key pair that was previously generated through the “Generate a
New Key and Certificate Signing Request ” link.
May also be shown as 4000002200000000 or 0x4000002200000000
Severity: Error
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0034
SNMP Trap ID: 22
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the certificate that you are importing is correct.
2. Try to import the certificate again.
40000023-00000000 Flash of [arg1] from [arg2] succeeded for user [arg3] .
Explanation: The specified firmware update has been completed.
May also be shown as 4000002300000000 or 0x4000002300000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0035
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000024-00000000 Flash of [arg1] from [arg2] failed for user [arg3].
Explanation: The specified firmware has not been updated.
May also be shown as 4000002400000000 or 0x4000002400000000
Severity: Info
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0036
SNMP Trap ID: 22
Automatically notify Support: No
User response: Information only; no action is required.
40000025-00000000 The [arg1] on system [arg2] is 75% full.
Explanation: The IMM event log is 75% full. When the event log is completely full, the new entries will overwrite
the oldest entries. To avoid losing older log entries, save the log as a text file and clear the log.
May also be shown as 4000002500000000 or 0x4000002500000000
40000022-00000000 • 40000025-00000000
Chapter 6. Troubleshooting 79
To Next Page
Loading...
