IBM System x3400 Type 7975 - User Manual

Welcome.
Thank you for buying an
IBM server.
This server
contains information for setting
up and configuring your server.
For detailed information about
your server, view the publications
on the
You can also find the most
current information about
your server at:
http://www.ibm.com/servers
/eserver/support/xseries/index.html/.
Your server
is based on the X-Architecture
technology, and it features
superior performance, availability,
and affordability.
Documentation CD.
Installation Guide
Installation Guide
System x3400
Types 7973, 7974,
7975, and 7976
Turn off the server
and install options.
Did the server
start correctly?
Ye s
No
Go to the Server Support
flow chart on the reverse
side of this page.
Start the server.
Did the server
start correctly?
Ye s
No
Cable the server and options;
then, restart the server.
Was the
server setup
completed?
Use
ServerGuide to
install the operating
system?
The server is ready to use.
Go to
to register the server.
http://www.ibm.com/support/mysupport/
Go to the Web for instructions:
http://www.ibm.com/support/
No
Ye s
Ye s
No
Use the IBM
ServerGuide program
to set up and
configure hardware.
Go to the Server Support
flow chart on the reverse
side of this page.
Install applications,
such as IBM systems
management software
and IBM ServeRAID
programs

IBM System x3400 Type 7975 Specifications

General

Brand	IBM
Model	System x3400 Type 7975
Category	Server
Language	English

Summary

Chapter 1. Introduction

System Overview and Documentation

Overview of documentation, requirements, browser, notices, and system components.

Chapter 2. Installing options

Installation Preparation and Safety

General guidelines and safety precautions for installing server options.

Server Component Installation and Removal

Procedures for removing covers and installing memory, drives, and adapters.

Finalizing Installation

Steps to complete the installation, including reassembly and configuration updates.

Chapter 3. Server controls, LEDs, and power

Front Panel Controls and Indicators

Identifies controls, LEDs, and connectors on the server's front panel.

Rear Panel Connectors

Illustrates and describes the connectors on the server's rear panel.

Server Power Management

Explains how to manage server power, including turning it on and off.

Chapter 4. Configuring the server

Server Setup and Configuration Utilities

Guides on using utilities for initial server setup and hardware configuration.

RAID and Remote Management Configuration

Details on configuring RAID, BMC, SOL, Ethernet, and IBM Director.

Chapter 5. Solving problems

Troubleshooting Common Issues

Solutions for common hardware and software issues encountered during operation.

Diagnostic Tools and Error Identification

Overview of diagnostic tools and identification of POST beep and error codes.

System-board LEDs for Diagnostics

Explains how system-board LEDs aid in diagnosing hardware problems.

Appendix A. Getting help and technical assistance

Support Resources and Procedures

Guidance on obtaining help, using documentation, and IBM support services.

Appendix B. Notices

Legal, Trademark, and Environmental Notices

Legal disclaimers, trademarks, recycling, battery, and environmental notices.