This configuration consists of one 8x2.5-inch drive backplane and requires two
SAS signal cables.
This configuration consists of one 8x1.8-inch drive backplane and requires two
SAS signal cables. You can also install the optional simple-swap 2.5-inch SATA
drive kit in this configuration.
The following illustrations show the supported combination of drive backplane
configurations that you can use to support 12 drives:
This configuration consists of three 4x2.5-inch drive backplanes and requires
three SAS signal cables.
This configuration consists of one 8x2.5-inch drive backplane and one
4x2.5-inch drive backplane and requires three SAS signal cables.
This configuration consists of one 4x2.5-inch drive backplane and one
8x1.8-inch drive backplane and requires three SAS signal cables.
8 9 10 15
0123
Empty Empty
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
1.8” SSD
2.5” HDD/SSD
2.5” HDD/SSD
2.5” HDD/SSD
2.5” HDD/SSD
1112 13 14
64 System x3690 X5 Types 7147, 7148, 7149, and 7192: Installation and User's Guide
To Next Page
Loading...
