IBM ThinkPad R40 - Page 122

Removing and replacing a FRU
Step Screw (quantity) Torque
□
M2 x 13 mm, Silver (1) 0.294 Nm
(3 kgfcm)
□
M2.0 x 3.5 mm, Silver (1) 0.294 Nm
(3 kgfcm)
W hen in s ta llin g : Attach the Ultrabay Plus guide rail so
that the two small projections on the
ultrabay device connector fit into the
holes Q provided, and then secure the
screws.
118 ThinkPad R40