EasyManua.ls Logo

IBM ThinkPad R40 - Battery Safety Notices

IBM ThinkPad R40
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Symptom-to-FRU index
Error messages
Symptom o r error FRU o r action, in sequence
Device address conflict. 1. Load Setup Defaults in
IBM BIOS Setup U tility .
2. Backup battery.
3. System board.
Allocation error for device. 1. Load Setup Defaults in
IBM BIOS Setup U tility .
2. Backup battery.
3. System board.
Failing bits: nnnn. 1. DIMM.
2. System board.
Invalid system configuration
data.
1. DIMM.
2. System board.
I/O device IRQ conflict. 1. Load Setup Defaults in
IBM BIOS Setup U tility .
2. Backup battery.
3. System board.
Operating system not found. 1. Check that the operating
system has no failure and is
installed correctly.
2. Enter IBM BIOS Setup
U tility and see whether
the hard-disk drive and
the diskette drive are
properly id entifie d.
3. Reset the hard-disk drive.
4. Reinstall the operating
system.
5. Diskette drive.
6. Hard-disk drive.
7. System board.
Hibernation error. 1. Restore the system
co nfigura tion to w hat it
was before the com puter
entered hibernation m ode.
2. If memory size has been
changed, re-create the
hibernation file.
Fan error. Fan.
Thermal sensing error. System board.
5 6 ThinkPad R40

Table of Contents

Other manuals for IBM ThinkPad R40

Related product manuals