ICM Controls i3 2010WR User Manual

27
VIEW
SLEEP
Display setpoints, fan, and program information
Press
or toselect. = Don’t display setpoints and program schedule information.
= Always display setpoints and program schedule information.
REMOTE SENSOR 1 = REMOTE SENSOR 1 temperature will display.
REMOTE SENSOR 2 = REMOTE SENSOR 2 temperature will display.
Press
toexit.
Setting the Vacation Timer
ThevacationtimerletsyousetthedateandtimeofyourRETURNfromvacation.Untilthatdate/time,thesystemwillremainat
theVACATIONheatingandcoolingsetpointsspeciedinthecongurationmenu.
TousetheEASYVACATIONfeature:
Press
,thenpressthe toscrollto“Vacation”thenpress again.ThethermostatwillautomaticallygointoVacation
modewiththedefaultreturndate1monthlater.
Tosetthevacationtimer(andbeginvacationsetpointmode):
1.Press
toselectoperatingmode.
2.Press
,thenpress untilVACATIONappears.
3.Press
toenterthedateandtimeyouplantoRETURNfromvacation.
4.Whenyournishedenteringthedate/time,press
.
Schedule Override
Thescheduleoverridefeatureallowstheusertooverridetheprogramschedulefor1to5hours.Inaddition,ifselected,the
schedulecanbeoverriddenonlyuntilthenexttransitionperiod.
ToaccesstheScheduleoverridefeature,enterthe
screen,thenuse toscrollthroughthemenuoptionsuntilyoureach
theSCHEDULEOVERRIDEscreen.Inthedefaultsetting,theVacation&Scheduleperiodswillbeashingintheupperright
corneroftheLCD.Inthismode,theVacation&Schedulewillbeoverriddenuntilthenexttransitionperiod.Toswitchtothe1-5
houroverride,usethe
arrow.ThismodeallowstheusertooverridetheSchedulesetpointsfor1-5hours.

ICM Controls i3 2010WR Specifications

General

Brand	ICM Controls
Model	i3 2010WR
Category	Thermostat
Language	English