ICM Controls i3 2010WR - Terminal Designator Descriptions

6
Terminal Designator Descriptions
SC,S1,S2–Remotesensororoutdoorsensor
 RC,RH–24VAChot
 C–24VACcommon
 Y1–1ststagecool,1ststageheatforheatpumps
 Y2–2ndstagecoolfor2-compressorsystems.2ndstageheatfor2-compressorheatpumpsystems.
 G–Fan
W1/O/B–Congurable
 W1 – 1ststageheatfornon-heatpumpsystems
 O – Coolactivereversingvalve
 B – Heatactivereversingvalve
 W2–2ndstageheatfor1compressorheatpumpandnon-heatpump
 AUX–3rdstageheat
Note:Not all terminals are used in every model.