
Do you have a question about the ICM Controls SC2201 and is the answer not in the manual?
| Brand | ICM Controls |
|---|---|
| Model | SC2201 |
| Category | Thermostat |
| Language | English |
Adjusts the desired temperature setpoint for heating or cooling.
Configures the temperature range before the system cycles on/off.
Guides on setting the fan and mode for system operation.
Wiring conversion for Carrier Split Stream Condensers and Heat Pump Systems.
Wiring conversion for Coleman 3000 Series Heat Pump Systems.
Wiring conversion for Comfortmaker CYC Series Heat Pump Systems.
Wiring conversion for Heil-Quaker 867.814 and PH50 Series Heat Pump Systems.
Wiring conversion for Payne Reliant and Endura Model Heat Pump Systems.
Wiring conversion for Rheem/Ruud P-Series Heat Pump Systems.
Wiring conversion for Goodman, Janitrol, Trane/American Standard Systems.
Wiring conversion for York -E1CS, -E1FB, E1FH Heat Pump Systems.
Wiring conversion for Lennox CB19 Heat Pump Systems.
Wiring conversion for Lennox HP19 and HP20 Heat Pump Systems.
Wiring conversion for FHP 1 Stage Heat Pump Systems.












Loading...