Icom IC-2100H

9
1
PANEL DESCRIPTION
KEY FUNCTION
➥ Clears a digit before entry. (p. 17)
➥ Cancels the scan, priority watch or
DTMF memory function. (pgs. 16, 37,
43)
Enters set mode and advances the set
mode selection.
➥ Sets the keypad for numeral input
(p. 17)
➥
Decreases the set mode selection order
after entering set mode.
No primary function.
No primary function.
No primary function.
SECONDARY FUNCTION (after )
➥ Writes VFO contents into the memory
or call channel. (p. 29)
➥ Advances the memory channel number
when continuously pushed after pro-
gramming is completed. (p. 28)
DTMF memory OFF.
Turns the subaudible tone encoder, pocket
beep or tone squelch OFF.(pgs. 21, 47, 46)
Mutes the audio. (p. 18)
• Mute function is released when any operation
is performed.
Locks the digit keys on the keypad (includ-
ing the A to D, # and M keys. (p. 14)
Sends a 1750 Hz tone signal for 0.5 sec.
(p. 22)
FUNC
OTHER FUNCTIONS
MW
A
CLR
D-OFF
B
SET
T-OFF
C
ENT
MUTE
D
16 KEY LOCK
#
TONE-1
M
After :
Transmit the appropriate
DTMF code. (p. 45)
DTMF-S
[A] to [D] transmit DTMF
memories. (p. 44)