20
4
BASIC OPERATION
■ One-touch PTT function
The PTT switch can be operated as a one-touch
PTT switch (each push toggles transmit/receive).
Using this function you can transmit without push-
ing and holding the PTT switch.
To prevent accidental, continuous transmissions
with this function, the transceiver has a time-out
timer. See p. 55 for details.
Ä Push [FUNC] then [➂PTT-M] to turn the one-touch PTT
function ON.
• The activity indicator lights green.
Å Push [PTT] to transmit and push again to receive.
• Two beeps sound when transmission is started and a long beep
sounds when returning to receive.
•“$” flashes when transmitting with the one-touch PTT func-
tion.
Ç Push [FUNC] then [➂PTT-M] to turn the one-touch PTT
function OFF.
• The activity indicator goes out.
To Next Page
Loading...
